Attention: Please take a moment to consider our terms and conditions before posting.

Official CL weekend Lycra warriors thread (cycling)

1…108109111113114…119

Comments

  • Baldybonce
    Baldybonce Posts: 9,640
    Leroy Ambrose said:
    In case you were wondering, hitting the deck at (checks notes) 52k/h, sliding 5 metres along the road and having another rider land on top of you is quite painful. Do not recommend... 😫

    and you didn't think to whip your phone out and do a few selfies? :D
  • iainment
    iainment Posts: 8,036
    I’m doing this at the weekend,

    www.cobblemonster.com 

    Anyone else doing it?
  • Leroy Ambrose
    Leroy Ambrose Posts: 14,435
    Baldybonce said:
    Leroy Ambrose said:
    In case you were wondering, hitting the deck at (checks notes) 52k/h, sliding 5 metres along the road and having another rider land on top of you is quite painful. Do not recommend... 😫

    and you didn't think to whip your phone out and do a few selfies? :D
    Erm... 
  • Leroy Ambrose
    Leroy Ambrose Posts: 14,435
    iainment said:
    Leroy Ambrose said:
    In case you were wondering, hitting the deck at (checks notes) 52k/h, sliding 5 metres along the road and having another rider land on top of you is quite painful. Do not recommend... 😫
    Hope it gets better soon. But more importantly how’s the bike?
    Fucked, but not irreparably so. Shifter, bar, both wheels. No frame or groupset damage though 
  • colthe3rd
    colthe3rd Posts: 8,486
    Not sure why but you never struck me as the sort of person to have tattoos.
  • Leroy Ambrose
    Leroy Ambrose Posts: 14,435
    colthe3rd said:
    Not sure why but you never struck me as the sort of person to have tattoos.
    Got loads of em  😂
  • colthe3rd
    colthe3rd Posts: 8,486
    Leroy Ambrose said:
    colthe3rd said:
    Not sure why but you never struck me as the sort of person to have tattoos.
    Got loads of em  😂
    PM me some more pics if you like.


    Seriously though glad it's nothing to serious and sounds like the bike is okay.
  • Baldybonce
    Baldybonce Posts: 9,640
    £20 little treat for myself 
  • colthe3rd
    colthe3rd Posts: 8,486
    That's lovely. Greenwich market?
  • Baldybonce
    Baldybonce Posts: 9,640
    colthe3rd said:
    That's lovely. Greenwich market?
    Yep.
  • Sponsored links:



  • buckshee
    buckshee Posts: 7,866
    Probably late to the party regarding this but do most folks on here use ceramic bottom brackets and if so what’s the opinion on them, worth getting?
  • Leroy Ambrose
    Leroy Ambrose Posts: 14,435
    buckshee said:
    Probably late to the party regarding this but do most folks on here use ceramic bottom brackets and if so what’s the opinion on them, worth getting?
    If you're looking to take 3 seconds off your local 10 mile club ten time, and willing to spend 150 quid on it (cheaper ceramic bearings are worse than good standard bearings) then yeah, sure. In reality, you're much better off spending half that money on a good upgrade to the standard shit one that came with the bike originally (wheels manufacturing make excellent adapters for press fit, for instance) and the other half on beer. 
  • buckshee
    buckshee Posts: 7,866
    Leroy Ambrose said:
    buckshee said:
    Probably late to the party regarding this but do most folks on here use ceramic bottom brackets and if so what’s the opinion on them, worth getting?
    If you're looking to take 3 seconds off your local 10 mile club ten time, and willing to spend 150 quid on it (cheaper ceramic bearings are worse than good standard bearings) then yeah, sure. In reality, you're much better off spending half that money on a good upgrade to the standard shit one that came with the bike originally (wheels manufacturing make excellent adapters for press fit, for instance) and the other half on beer. 
    Cheers pal, hope the injuries are clearing up. 
  • Leroy Ambrose
    Leroy Ambrose Posts: 14,435
    buckshee said:
    Leroy Ambrose said:
    buckshee said:
    Probably late to the party regarding this but do most folks on here use ceramic bottom brackets and if so what’s the opinion on them, worth getting?
    If you're looking to take 3 seconds off your local 10 mile club ten time, and willing to spend 150 quid on it (cheaper ceramic bearings are worse than good standard bearings) then yeah, sure. In reality, you're much better off spending half that money on a good upgrade to the standard shit one that came with the bike originally (wheels manufacturing make excellent adapters for press fit, for instance) and the other half on beer. 
    Cheers pal, hope the injuries are clearing up. 
    Yeah - raced yesterday to test them out and OK - ribs still painful at vo2max, and grazes are sore but I'm back quicker than I thought I'd be. Cheers 😊
  • Clem_Snide
    Clem_Snide Posts: 11,735
    New bike day. Ignore the saddle height, bloody faff fitting the seat post and got so hot and bothered doing it that as soon as it came together I screwed it in place and ran in to get out of the sun! Will sort it out on the maiden ride this evening.

  • colthe3rd
    colthe3rd Posts: 8,486
    Very nice Clem
  • Red_in_SE8
    Red_in_SE8 Posts: 5,961
    What is the spec on that? And what is wrong with the seat height? It seems to be just a little higher than the handlebars which is the where I always configure my seat height. Though maybe pointing more down at the front very slightly.
  • Clem_Snide
    Clem_Snide Posts: 11,735
    Red_in_SE8 said:
    What is the spec on that? And what is wrong with the seat height? It seems to be just a little higher than the handlebars which is the where I always configure my seat height. Though maybe pointing more down at the front very slightly.

    It's SRAM eTap Rival AXS. The wheels were an after market carbon purchase. It's officially the mid range model, and they do a Di2 version (Dura Ace Only) and all 3 versions of eTap. You can get mechanical Ultegra as well.

    Only mentioned the seat height as it looked a little weird and is too low for me at the moment.
  • Red_in_SE8
    Red_in_SE8 Posts: 5,961
    Clem_Snide said:
    Red_in_SE8 said:
    What is the spec on that? And what is wrong with the seat height? It seems to be just a little higher than the handlebars which is the where I always configure my seat height. Though maybe pointing more down at the front very slightly.

    It's SRAM eTap Rival AXS. The wheels were an after market carbon purchase. It's officially the mid range model, and they do a Di2 version (Dura Ace Only) and all 3 versions of eTap. You can get mechanical Ultegra as well.

    Only mentioned the seat height as it looked a little weird and is too low for me at the moment.
    Looks really nice.
  • Leroy Ambrose
    Leroy Ambrose Posts: 14,435
    Lovely bike! 

    Seat height is a personal thing, but all things being equal, if the frame is the right size, the saddle on that should be about six inches higher, or he'd have patellar tendinitis after two rides 😏
  • Sponsored links:



  • Baldybonce
    Baldybonce Posts: 9,640
    Leroy Ambrose said:
    Lovely bike! 

    Seat height is a personal thing, but all things being equal, if the frame is the right size, the saddle on that should be about six inches higher, or he'd have patellar tendinitis after two rides 😏
    6" ?. I'm not so sure.
    The bike looks like a 58cm or L.
    i'd go seat up a couple of inches and stem down.
  • Leroy Ambrose
    Leroy Ambrose Posts: 14,435
    Baldybonce said:
    Leroy Ambrose said:
    Lovely bike! 

    Seat height is a personal thing, but all things being equal, if the frame is the right size, the saddle on that should be about six inches higher, or he'd have patellar tendinitis after two rides 😏
    6" ?. I'm not so sure.
    The bike looks like a 58cm or L.
    i'd go seat up a couple of inches and stem down.
    Poetic license :D
  • Baldybonce
    Baldybonce Posts: 9,640
    From FB which may be of interest 
  • Leroy Ambrose
    Leroy Ambrose Posts: 14,435
    Fabulous national champs races yesterday in Scotland in atrocious conditions. Had two mates in the women's race, one sadly DNF, the other finished sixth - and a lad I know was in the early break in the men's race (got to have been pinching himself doing turns with Cav 🤣) - him and two more mates who I race against a lot up here finished in the third group on the road. 

    All those people who think Cav is 'just a sprinter' can shut up now - 200km in the break and winning the sprint at a canter might make Pat LeFevere have second thoughts... 
  • JohnBoyUK
    JohnBoyUK Posts: 9,017
    Cav ISNT riding the TdF unfortunately...
    https://www.bbc.co.uk/sport/cycling/61953009
  • Leroy Ambrose
    Leroy Ambrose Posts: 14,435
    edited June 2022
    JohnBoyUK said:
    Cav ISNT riding the TdF unfortunately...
    https://www.bbc.co.uk/sport/cycling/61953009
    With lulu definitely out as well it makes the decision more of a chin scratcher. They haven't got anyone who can go deep on GC, and having another sprinter gives them more options if for instance Jakobsen crashes or misses the TC. Still - it's always a risk to take two last men in case they don't work for each other. Shame - but was always a long shot. 
  • Baldybonce
    Baldybonce Posts: 9,640
    Be beware in Greenwich town centre this morning 
  • _MrDick
    _MrDick Posts: 13,103
    Absolutely stacks of club cyclists out this morning in the Bexley area. All different club colours reminded me of a scene from the Warriors
  • Clem_Snide
    Clem_Snide Posts: 11,735
    Less than 2 weeks to put a nice scratch on brand new carbon wheels. Fucking London roads are a nightmare.
  • Leroy Ambrose
    Leroy Ambrose Posts: 14,435
    Clem_Snide said:
    Less than 2 weeks to put a nice scratch on brand new carbon wheels. Fucking London roads are a nightmare.
    Urrrrgh. Same thing happened to me on a TT a couple of years ago. Brand new disc wheel (less than a month old) screw straight through tyre, tube and rim 😡

Categories

“Marketplace”